/begin_header /identifier_product_doi=10.5067/SeaBASS/NAAMES/DATA001 /received=20190516 /investigators=Kay_Bidle /affiliations=Rutgers_University !/affiliations=Rutgers_University_Department_of_Marine_and_Coastal_Science /contact=bidle@marine.rutgers.edu /experiment=NAAMES /cruise=NAAMES_3 /station=S5 /data_file_name=09_15_17_AT34_TEP_INC.sb /documents=InsReport_SpectraMax_M3_TEP.docx /calibration_files=Cal_File_TEP_NAAMES_3.docx /data_type=bottle /start_date=20170912 /end_date=20170915 /start_time=04:00:00[GMT] /end_time=04:00:00[GMT] /north_latitude=51.8863[DEG] /south_latitude=-51.8863[DEG] /east_longitude=-39.7003[DEG] /west_longitude=-39.7003[DEG] /measurement_depth=NA /secchi_depth=NA /water_depth=NA /wave_height=NA /wind_speed=NA /cloud_percent=NA /missing=-999 /data_status=preliminary /delimiter=tab /fields=depth,volfilt,abs /units=m,L,unitless ! ! COMMENTS ! Lat and Lon refer to location seawater was collected. Start and end times correspond to when seawater was placed in and removed from incubators. Start and end dates refer to when seawater was placed in and removed from incubators. ! Depth refers to depth water was collected from before incubation. Volfilt is the volume filtered for analysis. Abs is the absorbance of the spectrophotometer after blank was subtracted, for TEP particles stained with Alcian blue and extracted from filters. BC = biocast, D = deepcast, ML = microlayer, INC = incubations. Metadata obtained from CTD cast log. /end_header 5 0.15 0.378 5 0.15 0.117 5 0.15 0.104 5 0.15 0.127 5 0.15 0.184 5 0.15 0.137 5 0.15 0.151 5 0.15 0.137 5 0.15 0.114 15 0.15 0.097 15 0.15 0.079 15 0.15 0.116 15 0.15 0.131 15 0.15 0.086 15 0.15 0.05 15 0.15 0.084 15 0.15 0.089 15 0.15 0.088 36 0.15 0.062 36 0.15 0.047 36 0.15 0.067 36 0.15 0.045 36 0.15 0.023 36 0.15 0.045 36 0.15 0.055 36 0.15 0.029 36 0.15 0.057